Zoom

CANit-xx I/O module family

Save as PDF

CANit-10/20 CANopen units

The CANopen units CANit-10 and CANit-20 are general purpose CANopen remote I/O modules with 8/16 digital inputs and 8/16 digital outputs for 24 VDC. They are especially designed for easily connecting almost all kinds of sensors and actuators to a CANopen-network. There is no necessity of making any program. The CANit-units have separated power supplies for the system/bus and the I/Os. All I/Os by Frenzel + Berg are positive switching and opto-isolated from bus and system supply. The outputs are short-circuit-protected and output overload monitoring is supported. Different bit-rates up to 1 Mbit are possible. The CAN-connectors are at the side and rail mounting allow to align the CAN units directly, without using a CAN-cable between each other. The CANit-10/20 I/O modules are available as an open frame PCB, in a front side opened plastics enclosure or in a closed aluminum enclosure. Both enclosures are suitable for mounting on carrier rail.

Canopen unit CANit-10

  • 8 digital inputs, 8 digital outputs
  • Measurements (Aluminium-Enclosure)
    (L x W x H) 116 x 76 x 80 mm

CANopen unit CANit-20

  • 16 digital inputs, 16 digital outputs
  • Measurements (Alumimium-Enclosure)
    (L x W x H) 161 x 76 x 80 mm