Zoom

CiA interoperability test

Save as PDF

CAN in Automation (CiA) is proud to offer the service of CANopen interoperability testing in CAN in Automation`s testing laboratory. Supported by CiA member companies such as Fritz Kübler, Ixxat Automation, Maxon Precision Motors, Micro Control, Port as well as Posital, Schneider Electric Automation and Vector Informatik a special test stand was built up for this purpose.
CANopen interoperability testing is a service for CiA member companies only. The aim of the interoperability test is to assure that CANopen devices are capable of interacting with a variety of other CANopen devices from multiple vendors, all integrated in the test stand. The heart of the test stand is the mid range PLC for industrial process and infrastructure – Modicon M340 from Schneider Electric used for the configuration of the devices. Further the test stand is equipped with a variety of other CANopen devices, such as I/O modules, encoders, drives and so on.

CANopen interoperability testing offered by CAN in Automation is a service that verifies that the device under test (DUT) is able to interact in a CANopen multi-vendor system.

The CiA interoperability test covers the following listed scenarios

• Test of correct CAN communication in the system, enhanced by DUT

• Test whether DUT can be integrated by means of CANopen configuration tools

• Test whether DUT can be integrated by means of Schneider Electric’s Modicon M340.

• Test whether DUT is still operating fine, in case the network is stressed
  (e.g. by means of high bus load; long bus lines; etc.) 

 

Detailed information on CANopen interoperability testing is available at CiA office.