Zoom

Kvaser U100-C

Save as PDF

The latest laptops and PCs come with USB-C slots only, so the Kvaser U100-C (01340-7) has been added to Kvaser’s U100 range of robust, single-channel CAN/CAN FD to USB interfaces. This interface is based on the standard Kvaser U100 with DB-9 connector, but replaces the standard USB type “A” connector with the smaller USB-C format. As with other devices in the range, this is powered via the USB bus.

Robust, galvanically-reinforced and signal and power isolated, the Kvaser U100 range offers enhanced electrical protection, a vibration, shock and drop-proof housing and high-quality cabling that establishes a new reference in CAN interface design.

The Kvaser U100 is already available with standard USB type “A” connectors and 9-pin D-SUB, J1939-13 Type II or OBD-II CAN connectors, or as a Precision version, the Kvaser U100P, with a standard USB type “A” connector to a 9-pin D-SUB.

Major Features

  • Supports CAN FD, up to 8 Mbit/s (with correct physical layer implementation).
  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
  • Supports silent mode for analysis tools – listen to the bus without interfering.
  • Reinforced galvanic isolation, design validated with 5000 VAC rms applied for 60 s.
  • 20 000 msg/s, timestamped with a resolution of 1 μs.
  • Industrial grade temperature range, -40 °C to +85 °C.
  • USB-C connector.
  • Powered through the USB bus.
  • DB-9 connector (other connectors available).
  • Supports bit rates from 10 Kbit/sec up to 1 Mbit/sec.
  • Lightweight, glass fibre reinforced polyamide housing, overmolded with TPE.
  • IP67 rated.
  • Intuitive LED UI.
  • Support for SocketCAN.
  • Compatible with J1939, CANopen, NMEA 2000® and DeviceNet.
  • Fully compatible with applications written for other Kvaser CAN hardware with Kvaser CANlib.