|Node ID range
|Type of bit-rate adjustment
Triggered by event-timer
Synchronous (cyclic) coupled to sync counter start value
Time stamp producer
Time stamp consumer
PLCopen/IEC 61131 function blocks
CiA 301 V 4.0.2
CiA 402: CANopen drives and motion control device profile
CiA 405: CANopen interface and device profile for IEC 61131-3 programmable devices
PO Box 194
Visit and delivery addresses:
Visit and delivery addresses:
Korkeakoulunkatu 7, 6th floor
Room 402, #2 Building,
690 Bibo Road, Zhangjiang Hi‑Tech Park,
Shanghai 201203, P.R. China
Australia and New Zealand
Tele Radio Australia Pty Ltd
97 Ewing Street
Welshpool WA 6106
DAS Co., Ltd.
128 Bibong-ro, Bibong-myeon, Hwaseong-si
Gyeonggi-do, 18284 Republic of Korea
Phone : +82-31-356-3541 Fax : +82-31-356-3572 (Local only) Email : email@example.com
Canada & USA
Certified Power Inc.
970 Campus Drive
Mundelein, IL 60060
Fax: +1 847 573 3832
Viale Lazio, 26
Bram Engineers B.V.
2991 LS Barendrecht
OEM Automatic AB
573 28 TRANÅS
Electrum Automation Ab
Epec control units are extremely compact, powerful and robust multifunction controllers:
Epec multipurpose control units are excellent base for embedded machine control systems. All the units have the same robust environmental features but the I/O interface allocation varies according to the product type.
The units have an open I/O interface which makes it easy to connect sensors, actuators, joysticks and other devices from most common manufacturers. This makes it relatively easy to optimize the whole control system both in technical and economical way. Epec multipurpose control units have optimized number of both input and output pins to be used in numerous roles in the control system. The total number of I/O pins is 20–65 depending of the product. I/O pins includes digital inputs and outputs, analog inputs, pulse inputs, proportional (PWM) outputs and feedback inputs or upside current measurement. The type of each input is determined by the user application software allowing flexible use of the controller.
The controllers are used in very hard environmental conditions (IP67) thus they endures cold, heat, vibration, moisture and impacts easily. This makes the installing also easy as the modules do seldom require any extra protection. All these control units conforms the automotive E17 standards and have a shock endurance up to 100 G.
Gold plated heavy duty AMPSEAL connectors help installing both in machine factory and in the field. Each connector is color coded and mechanically keyed to suit only into the right place. The connector type is specially designed for wire harness use in volume production.
In addition to open I/O interface, Epec control units have 1-4 CAN interfaces. CAN interfaces are CANopen compatible and user programmable enabling e.g. SAE J1939 and Isobus communications also.
Controllers are PLCopen programmable which makes the programming work easy and convenient shortening development time for new systems. Codesys programming tool provides with easy graphic environment for developers to work with.
For further information about Epec multipurpose control units (Epec EC44 Control Unit, Epec 5050 Control unit, Epec 4602 Control Unit, Epec 3724 Control Unit, Epec 3720 Control Unit, Epec 3606 Control Unit, Epec GL84 Slave Unit) and other Epec products supporting CANopen and SAE J1939, please visit our website http://www.epec.fi.