Zoom

PCAN-Router FD module

Save as PDF

Universal Programmable Converter for CAN FD and CAN

The PCAN-Router FD has two CAN channels that support the CAN FD standard in addition to the conventional CAN 2.0 specification. The module behavior and the data exchange between the two channels are freely programmable. Thus, for example, a conversion of CAN to CAN FD and vice versa is possible and new CAN FD applications can be integrated into existing CAN 2.0 networks.

For all information about the PCAN-Router FD, just click on the following link: www.peak-system.com/quick/CiA-CPG-8

Specifications:

  • NXP LPC4078 microcontroller (ARM Cortex M4 with FPU, 120 MHz)
  • On-chip 4 kByte EEPROM
  • 4 MByte SPI flash
  • Two High-speed CAN channels (ISO 11898-2)
  • Comply with CAN specifications 2.0 A/B and FD
  • CAN FD support for ISO and Non-ISO standards
  • CAN FD bit rates for the data field (64 bytes max.) from 25 kbit/s up to 12 Mbit/s
  • CAN bit rates from 25 kbit/s up to 1 Mbit/s
  • NXP TJA1044GT CAN transceiver
  • Status signaling with two 2-color LEDs
  • Connections via two 9-pin D-Sub connectors or one 10-pole screw-terminal strip (Phoenix)
  • RS-232 connector for serial data transfer
  • I/O-connection:
  • One digital input (low-active)
  • One digital output (Low-side switch, max. 600 mA)
  • 2 additional digital inputs alternatively to RS-232 (low-active)
  • Aluminum casing, optional with DIN rail fixing option available
  • Voltage supply from 8 to 30 V
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
  • New firmware can be loaded via CAN interface

Scope of Supply:

  • PCAN-Router FD in aluminum casing
  • IPEH-002215: mating connector (Phoenix)
  • Windows development software (toolchain with GCC ARM Embedded, flash program)
  • Library with programming examples
  • Manual in PDF format

Requirements:

  • The transfer of the firmware via CAN requires a PEAK CAN interface

For more information about PEAK-System, please visit the manufacturer's website: www.peak-system.com